Contents: 

With 1/4 drive: 

• 1 Ratchet 
• 1 Sliding T 
• 1 combi-handle 150 mm 
• 1 cardan 
• 1 each extension in 50 and 100 mm 
• per 1 Socket insert 6-kt.4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm 
• per 1 Socket insert 6-kt. (long version) 4, 5, 6, 7, 8, 9, 10 mm 
• 1 each per Socket Wrench Insert Torx E4, E5, E6, E7, E8 mm 
• 1 each screwdriver bit TORX® T8, T9, T10, T15, T20, T25, T27, T30 
• 1 each screwdriver bit TORX® (with frontal hole) T8, T9, T10, T15, T20, T25, T27, T30 
• 1 each screwdriver bit Phillips PH0, PH1, PH2, PZ0, PZ1, PZ2 
• 1 each screwdriver bit slot 4.5, 5, 6.5, 7 mm 
• 1 each screwdriver bit internal-6-kt. 3, 4, 5, 6 mm 

With 3/8 drive: 

• 1 Ratchet 
• 1 tilting extension 125 mm 
• 1 cardan 
• 1 spark-use 18 mm 
• 1 adapter for 8 mm bits 
• per 1 Socket insert 6-kt.10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm 
• per 1 Socket insert 6-kt. (long version) 10, 11, 12, 13, 14, 15 mm 
• 1 each per Socket Wrench Insert Torx E10, E11, E12, E14, E16, E18 
• 1 each screwdriver bit TORX® T8, T9, T10, T15, T20, T25, T27, T30 
• 1 each screwdriver bit TORX® (with frontal hole) T8, T9, T10, T15, T20, T25, T27, T30 
• 1 each screwdriver bit Phillips PH0, PH1, PH2, PZ0, PZ1, PZ2 
• 1 each screwdriver bit slot 4.5, 5, 6.5, 7 mm 
• 1 each screwdriver bit internal-6-kt. 3, 4, 5, 6 mm 

With 1/2 drive: 

• 1 Ratchet 
• 1 tilting extension 125 mm 
• 1 Sliding T 
• 1 cardan 
• 1 adapter for 8 mm bits 
• 1 each spark plug insert 16 and 21 mm 
• 1 each socket wrench insert 6 kt.10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32 mm 
• per 1 Socket insert 6-kt. (long version) 16, 17, 18, 19, 22 mm 
• 1 each per Socket Wrench Insert Torx E20, E24 
• 1 each screwdriver bit TORX® T8, T9, T10, T15, T20, T25, T27, T30 
• 1 each screwdriver bit TORX® (with frontal hole) T8, T9, T10, T15, T20, T25, T27, T30 
• 1 each screwdriver bit Phillips PH0, PH1, PH2, PZ0, PZ1, PZ2 
• 1 each screwdriver bit slot 4.5, 5, 6.5, 7 mm 
• 1 each screwdriver bit internal-6-kt. 3, 4, 5, 6 mm 

Bits: 

• 1 bit each 8 x 30 mm TORX® T40, T45, T50, T55, T60, T70 
• 1 bit each 8 x 30 mm TORX® (with frontal hole) T40, T45, T50, T55, T60, T70 
• 1 bit each 8 x 30 mm Phillips PH3, PH4, PZ3, PZ4 
• 1 bit per 8 x 30 mm slot 8, 10, 12 mm 
• 1 bit each 8 x 30 mm inner-6-kt. 7, 8, 10, 12, 14 mm 

Screwdriver: 

• 1 each Angle Screwdriver-6-kt. 1.27, 1.5, 2, 2.5, 3, 4, 5 mm